Liebert GXT2 User Manual download pdf (Page 36)

36 Chapter 1 Product Introduction

E1-20010230-C-1.0

B) After entering " function setup " menu , function information which can be setup can

be viewed and set by pressing the scroll key ; when the screen displays " Return to

main menu", press enter key to return the main menu of " operating parameters ".

C) After entering " function setup" menu , the parameters whose value is to be

modified are displayed in reverse contrast text mode and the parameters' values can

be changed by pressing the scroll key ; save the parameters which have already been

modified by pressing the enter key and the parameters' value will be stored and the

value display will switch from reverse contrast to normal text mode.



Note

When the equipment's address is changed, the charging between 3-bit digits are

done through auto shifting when no key is pressed for 3 seconds.

D) When it is in alarm state, alarm information can be viewed by pressing the scroll

key

；

When the screen displays "Return to main menu" , press the enter key to return

"operating parameters" main menu.

4. Information LCD-displaying Priority

1. LCD will display present alarm information of the highest priority if no key is pressed

in 30 second.

2. LCD-displaying information will not be changed when there is no alarm, the LCD will

display level 2 sub menu such as "Output current" when no key is pressed. On the

contrary, if the LCD isn't displaying the level 2 sub menu information and no key is

pressed in 30 second, it will return to the state to display " Output voltage: xxx ".

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42

No comments

Liebert GXT2 User Manual Page 36